Eaton Evolution S 2500 RT2U 230V Tower UPS - 68461
Model: 68461
Line interactive
High density protection for network devices
Maximum availability
-
Powershare: the Eaton Evolution S output sockets
are individually controlled to provide load-shedding to maximise the
backup time and provide remote reboot and sequential start-up as standard
-
Continuous power supply: Hot swappable batteries.
The optional HotSwap MBP (Maintenance By-Pass) module allows the UPS
to be replaced without interrupting the power supply
-
Long backup times: 1 to 4 EXB battery units can
be added to the Evolution S
-
Pure sinewave output: when operating in batterie
mode the Eaton Evolution still provides high quality output signal for
sensitive connected equipment
Minimum total cost of ownership
- Line-interactive HF technology: the best price/performance ratio
- No additional cost: all models are provided with tower stands and rail
kits
- Remote supervision: a wide range of options using the Eaton Software suite,
including point-to-point power management, SNMP, relay outputs, etc...
Total flexibility
Evolution has unmatched Flexibility.
- Format: Evolution S is available in RT2U convertible rack/tower version
(optimised for rack mounting) or RT3U (for tower or short-depth racks)
- Connections: with FlexPDU and HotSwap MBP the Evolution S can be connected
by sockets or terminal blocks. They can be installed as required behind, on
the side or on top of the unit
- Compatible with high power factor loads: the Evolution S are rated for
0.9 total power factor (1250 VA/1150 W, 1750 VA/1600 W, 2500 VA/2250 W and
3000 VA/2700 W)
- Communication: the Evolution S includes both serial and USB ports, plus
remote On/Off connector and an extra slot for optional communication cards.
The UPS comes with a complete Eaton software suite.
| Technical Specifications |
2500 |
| Rating (VA/W) |
2500 VA / 2250 W |
| Format |
RT2U (tower / rack 2U) |
| Electrical characteristics |
| Technology |
Line-Interactive High Frequency
(Booster + Fader) |
| Input voltage and frequency ranges without using
batteries |
160V-294V (adjustable to 150V-294V)
47 to 70 Hz (50 Hz system), 56.5 to 70 Hz (60 Hz system), up to 40 Hz in
low-sensitivity mode (programmable using Personal Solution-Pac software. |
| Output voltage and frequency |
230 V (+6/-10 %) (Adjustable to
200 V (10 % derating of output power) / 208 V / 220 V / 230 V / 240 V),
50/60 Hz +/- 0.1 % |
| Connections |
| Input |
1 IEC C20 (16 A) socket |
| Outputs |
8 IEC C13 (10 A) sockets
1 IEC C19 (16 A) socket |
| Remotely controlled sockets |
2 groups of 2 x IEC C13 (10 A) |
| Additional outputs with HS MBP |
4 FR/Schuko sockets or 3 BS sockets
or 6 IEC 10 A sockets or terminal blocks (HW version) |
| Additional outputs with FlexPDU |
8 FR/Schuko sockets or 6 BS sockets
or 12 IEC 10 A sockets |
| Batteries |
| Typical backup times for 50 and 70% load* |
| Evolution S |
17/11 mn |
| Evolution S + 1 EXB |
85/55 mn |
| Evolution S + 4 EXB |
290/200 mn |
| Battery management |
Automatic weekly test (period adjustable),
automatic recognition of external battery units => continuous maximisation
of backup time + deep discharge protection |
| Interfaces |
| Communication ports |
1 USB port + 1 RS232 serial port and relay
contacts (USB and RS232 ports cannot be used simultaneously) + 1 mini terminal
block for remote ON/OFF and Remote Power Off |
| Communications card slots |
1 slot for NMC Minislot card (included in
Netpack versions) or NMC ModBus/JBus or MC Contacts/Serial |
| Operating conditions, standards and approvals |
| Operating temperature |
0 to 40°C |
| Noise Level |
< 50 dBA |
| Performance - Safety - EMC |
IEC/EN 62040-1-1 (Safety), IEC/EN 62040-2
EN 50091-2 class B (EMC), IEC/EN 62040-3 (Performance), IEC/EN 61000-4-2,
61000-4-3, 61000-4-4; 61000-4-5, 61000-4-6, 61000-4-8 (EMI) |
| Approvals |
CE, CB report, TÜV |
| Dimensions W x H x D / Weight |
| Dimensions |
440 x 634 x 86.2 (RT2U) mm
440 x 484 x 130.7 (RT3U) mm |
| Weight of the Tower/Rack |
33.8 kg |
| Dimensions of EXB |
See UPS |
| Weight of the EXB |
41.7 kg |
Warranty: 2 Years Local On-Site warranty (parts and labour
according to EATON's warranty terms and conditions)
Battery Warranty: 1 Year On-site
|
